Portable Multi-Section Dipping Tank- 6 Sleeves

The inside box liner is made of stainless steel - it will last a lifetime.  Outer box is 3/4 inch birch plywood - it insulates the
dipping tank very well. A competitor's round dipping tank, without insulation, puts out heat like a stove, and will substantially
increase your electricity bill.  The plywood insulation also makes this dipping tank much safer.
You can NOT hurt yourself by just touching it. A competitor's round, bare metal dipping tank, without insulation, can burn you,
children, or pets if they touch the bare metal.  The whole dipping tank is only 17" wide, 23" long, and 20" high -
making it very easy to load into even a small car for moving.  The temperature control for the tank is covered by a panel -
 it can NOT be reached by children or pets. It is preset for dipping candles, but can be adjusted. 
The 6 individual wells can easily be moved into and out of the tank by using the quickly removable well handle. 
The wells are 7" in diameter and 17" deep - deep enough for dipping 12" candles. The 17" depth also allows a piece of wax
to be melting at the bottom of the well even while the well is being used for dipping. 
The heating element and temperature control are two separate units, and can be replaced separately.
The cost of replacements is $25. Competitors charge $125.  The heating element runs between the two rows of wells,
heating all wells equally - that means less problems with wax layer separation while carving.  The plywood box is unpainted -
you are free to finish it in your favorite color.  The dipping tank fits the optional, foldable four-wheel cart perfectly! 
The optional four-wheeled cart is foldable, so it can easily fit in the trunk or car.  The tank temperature is set to
allow a candle carver to dip and carve continuously. 
The tank has a built-in handle to make it even easier to move the tank when empty.

$1080.00